Small Mooney is "Mitey" Impressive
| Mooney Mite fan has a 35-year love
for a compact, 65-hp aircraft. |
THE CLICHE "good things come in small packages" may be fine for economy cars, poodles and blondes, but is it really true when it comes to airplanes? Tony Terrigno of Buena Park, California, thinks so. Tony's love affair with the compact Mooney Mite began in 1948 when he saw one on a nationwide factory tour. The trim little single-seater landed at the grass strip of Cernard in Youngstown, Ohio, Tony's hometown. "I said to myself, 'Someday, I'm going to own one,' " remembered Tony. |
|
|
|
|
|
|
|
|
The Mooney Mite was developed as a low-cost flying machine by Al Mooney and D.G. Yankey. The pair formerly headed the Culver Aircraft Corp., which went out of business early in the "iron bird" era. Before designing the Mite, Al Mooney already had created the Culver Cadet, some Monocoupes, the Dart and the Eaglerock Bullet. Shops were set up near Wichita in 1948 and part-time help was obtained from other aircraft plants. The prototype Mite and four subsequent models were equipped with 26-hp Crosley automotive engines. One of the originals reportedly is still flying. The Crosley version was fabric-covered and utilized four Goodyear belts with a 2:1 reduction to the prop. In those days, the factory had the CAA (a pre-FAA regulatory agency) certify the plane as well as the converted engine. Originally, the designer was considering either a Waukesha or a Hercules powerplant, but changed to the Crosley which was being used to power U.S. Navy electric generators. It was a heavy powerplant, 4 pounds per horsepower with 1.8 quarts of liquid coolant. Take off performance was rated poor with a 15-second roll considered normal. The Crosley also iced up very quickly. However, fuel consumption was down to 1.55 gph. The original factory price was $1995! Mites now sell for between $5000 and $8500, depending on condition and equipment. After the Crosley automotive engine was discontinued, the factory designations were M-18-L and M-18-LA for Lycoming; M-18-C and M-18-C55 for Continental powerplants. All these engines were 65 hp. The M-18-C55 was produced in 1955, the last production year. Of this group, 32 or so were the "stretched" version with the cockpit three inches longer, one inch wider and inches higher with a modified canopy. Mooney developed and patented the "Simpli-Fly" system on the Mite. One simple hand-crank integrated control trim and flaps. The whole tail unit of the Mite pivots in trimming and 16.5° flaps extend as the tail trim passes 3/4 travel. To save weight and cost, no electrical system or lights of any kind were on board. This meant hand-propping. Because the prop is so low to the ground, most owners pull their props through seaplane fashion from behind. Soundproofing was nowhere to be found in the original production models and instruments were kept to bare necessities. Originally, the fuel tank behind the pilot's head would carry seven gallons and six pints, and the baggage compartment would hold 20 pounds. Both were expanded when larger engines replaced the heavy automotive engine. Later models carried 14 gallons of fuel and had a 75-pound baggage capacity. The Mite was produced with a unique gear-warning system. An automotive windshield wiper was connected to the intake manifold and would wag a red disk back and forth when the throttle was retarded if the gear was not down and locked. Economics and the labor market dictated a move by Mooney to the wide-open spaces of Kerrville, Texas, in 1952. Although Mooney is still there, the Mite did not survive the final blow when Continental stopped building the A-65 engine. No comparable Lycoming was available, and Mooney was already in production on the more profitable four-place M-20. So the Mite was discontinued after eight years of production and 287 units with various powerplants. In a special production for the military COIN (Counter Insurgency) armed light plane competition, one Mite, the M19, was built around an M-18-C55 fuselage and powered with a C-90 Continental. This special unit sported two 30-caliber machine guns. Other entries in the COIN competition were John Thorp's Fletcher FD-25 and a special Swift. Tony believes that the remains of the COIN Mooney are "someplace in Texas. It crashed some years ago while attempting a takeoff with a large stone tied to its tail tiedown." An attempt was made to sell the Mite in kit form after factory production closed down. In 1977, Fred H. Quarles of Charlottesville, Virginia, attempted to merchandise a computer-programmed kit. More than 4000 pieces reportedly were included and the price was $5995. Advertisements for the kits claimed, "We've developed a materials list that checks off the smallest nut and bolt. We've developed a computerized quality control system that assures the builder of no long waits for bits and pieces. And now, we've put it together in a complex kit package. Everything is indexed and cross-indexed. The only thing more we could do to make it available to you is build it ourselves. Rather than have you wait for us to develop manufacturing facilities, we'll provide inspiration to help you get flying." Unfortunately, the kits didn't make it. To Tony Terrigno's knowledge, only one kit had been sold. |
|
|
During the Mite's heyday, some operators would lift the little airplane off the ground, support it on a couple of saw horses and let the student operate the manual gear while still safely on the ground. It took a trick and a flick of the wrist to stow the Mite's gear. Even today, you can frequently see a wobble during climbout as the pilot reaches down and pulls up on the gear handle. Some FBOs used to issue a hold-harmless agreement to be signed prior to renting their Mite. It called for a fixed charge of $65 for a gear-up landing on grass or $85 for a goofed landing on pavement. In those days, you could replace the wooden prop and smooth out the dings after a gear-up mishap. Today, one aviation reporter commented gleefully, "Operators renting Mooneys are finding that folks who used to fly together are now renting two or three single-seaters for breakfast flying and Sunday sport." Describing the initial Mite in a 1948 publication, the inimitable Max Karant stated, "This is the first time I've ever strapped an airplane on my pants and flown away. The Mooney M-18 is so tiny that you almost 'strap it on' to fly it." My personal logbook shows a flight in a Mite back when they were new. A now-defunct aviation magazine carried my report on N353A, first of the 65-hp Lycoming models to reach the west coast. Back in those days, we reported that the Mite would fly 100 miles on 80 cents worth of fuel.
"I'll take $15,000 down and the balance in five years when I deliver it to them." -- Tony Terrigno |
To save weight, the Mite has no electrical system, which means hand-propping.
|
|
West coast distributor Harry Yoyster, then located at Clover Field in Santa Monica, California, had the following requirements for rental of a Mite: 1. Possession of at least a private license; 2. At least five takeoffs and landings within the past 60 days; 3. At least 50 hours in an aircraft of 90 hp or less; 4. For a pilot who has never flown a Mooney Mite, there must be a check ride in an aircraft of 90 hp or less prior to first flight in the Mooney. The instructions I received were succinct. "You just get in and fly it. Come on out to the shop and I'll show you how to get the landing gear up. After that, you're strictly on your own." Ah, for those days again! This article by Don Downie was originally published in the January 1984 issue of PRIVATE PILOT. The earlier report that Don refers to is "Pilot's Report ... the Mooney Mite" which is also found on our Articles page. Thanks to Garry Gramman for this material. As a matter of interest, Tony Terrigno reluctantly sold N120C in February of this year. He got the price he asked for. The aircraft now belongs to Ted Reusch of Chino, CA. |
|
May 25, 2000